ZCS Server Setup & Config's

Zenar's chat server is as customizable as RSWCS & WCS and is a lot more stable than FXS,
It doesn't have a GUI panel [graphical user interface] like the others, it has a small cmd box as it opens, all your editing is done direct in the configs,
i must admit, having separate files for logins, replaces/blocks and fancy entry/exit makes it easy, if your editing one part and make a mistake, you don't ruin the whole config, i like it.
sadly Zenar is taking a long break to pursue other activities,

This is currently Zenar's most stable version of ZCS, its the one i use now, ZCS v1.04.3


this is the last betta version with an added feature, Relay command [similar to custom command of RSWCS & WCS] v1.05.1 RC1 [release candidate]


Please Note to run ZCS you will need .Net Framework, it's Available Here

Here is the config showing its explanations. under that is the contence of the include foler

Quote :

ChannelName=Test ZCS
ChannelName2=ZCS Test

Topic=We are testing ZCS!
Topic2=We are testing ZCS!

//The port number you want to use
Port=4369

//Feature not done yet...
JoinFlood=0

//You can put here your default peer cache you want to connect on
//It can be an IP or an hostname
WPNCaches=cache.zenmx.com

//If offline = 1, your room will not show
Offline=0

//The number of peers you want to connect on (2 min / 8 max)
//More the number of peers is high, more it will take bandwidth
//Reboot of ZCS is required
Peers=5

//The limit of users (5 min / 300 max)
Limit=100

//The number of same IPs you are allowing in your room (1 min / 5 max)
AllowMulti=5

//Messages allowed per second before to be considered as a flood
Flood=4

//Set 1 if you want to use a room password
LockChannel=0

//Set here the message you want to show to the users if the room is locked
LockMessage=This channel is password protected. Please, type the password to enter.

//The password needed to enter the channel
ChannelPassword=Pass

//You can set the interval of the keepalive (Advanced user only)
//60 = 60 seconds = 1 minute
KeepAlive=60

//You can split your config by using Include=[File Name]
//All include files are into the include folder.
Include=logins.ini
Include=replaces.ini
Include=texts.ini

//---> These variables will work on the MotD, the texts formats, etc... <---

// %TEXT% = The texts without colors and color codes
// %COLTEXT% = The texts with colors
// %RAWTEXT% = The texts without colors but color codes

// %NAME% = The username without colors and color codes
// %COLNAME% = The username with colors
// %RAWNAME% = The rawname without color codes
// %COLRAWNAME% = The rawname without colors but color codes

// %LINE% = The line of the user (DSL, Cable, ...)
// %FILES% = The number of files shared by the user
// %PRIMIP% = The IP of the primary peer you are connected to
// %PRIMUDPPORT% = The Port of the primary peer the user is connected on
// %IP% = The IP of the user
// %HOSTNAME% = The hostname of the user
// %ROOMUPTIME% = The room uptime
// %CLIENTNAME% = The client name of the user
// %CLIENTVERSION% = The version of that client
// %ACCESS% = The access of the user (acv...)
// %CONNECTION% = The connection of the user (Secondary, Primary, ...)
// %NODE% = The IP and Port of the peer the user is connected on (IP:Port)
// %TOTALMSG% = The number of messages sent by the user
// %FORMAT% = The format of message of the user
// %ROOMNAME% = The roomname used by the user to enter the room
// %STAYTIME% = The staytime of the user
// %IDLETIME% = The idle time of the user

// Here are the access used by ZCS

// + = Show +
// @ = Show @
// ! = Protected user
// * = Can use any letter
// # = Can see logins
// ? = See all console messages

// 0 =
// 1 =
// 2 =
// 3 =
// 4 =
// 5 =
// 6 =
// 7 =
// 8 =
// 9 =

// a = Can use /Me (/Action)
// A = Can use /Admsg (//)
// b = Enable or Disable bot mode
// B = Can Ban
// c = Can use colour codes
// C = Can use CAPS
// d =
// D =
// e = Can see exit message
// E = Can see client message
// f = Can flood
// F = Can use /Forcelogin
// g =
// G =
// h = Can use /Hide or /Hide
// H = Can use /Hidecmd
// i = Can see renames
// I = Can see IPs
// j =
// J =
// k = Can kick (Can't kick @ or ! or *)
// K = Can kick all but !
// l = Can use /Listbans
// L = Can set a limit
// m = Can use /Mute (/unvoice) and /voice (/unmute) [Can't mute * and !]
// M = Can use /Message
// n = Can use /Notice
// n = Can use /GNotice
// N = Can use newlines
// o = Can use /Online /Offline to show or hide the room
// O = Can use /Opmsg (/ )
// p =
// P =
// q = Can use /Setcolour to set own text colour
// Q = Can use /Setformat to set an user text format
// r = Can use /Reload to load the config
// R = Can use /Redirect to redirect the entire channel
// s = Can use /Stats to see user stats
// S = Can use /Stats to see channel stats
// t = Can change topi
// T =
// u =
// U = Can /Unban
// v = Has a voice (can talk)
// V =
// w = Can see commands made by other users
// W = Can use /Who to see infos about all users
// x = Can exile users
// X =
// y = Can use /Say
// Y = Can use /SayAll
// z =
// Z =

The Include folder contains the other info like logins, fancy entry etc:

the logins addon

Quote :

//---> Usage of Access: <---
// Access=[Name]=[Access]

Access=User=acvq
Access=Moderator=+acCeEfiIklNqQSv
Access=Admin=@aBcCeEfFiIklMnNOqQsSUv
Access=Host=@*
Access=Boss=#@*!

//---> Usage of FormatMsg: <---
// FormatMsg=[Name]=[Format]

FormatMsg=Blue=#c66#»#c52#×#c66#« %COLNAME% #c66#»#c52#×#c66#« #c52#%COLTEXT%
FormatMsg=Green=#c68#»#c54#×#c68#« %COLNAME% #c68#»#c54#×#c68#« #c52#%COLTEXT%
FormatMsg=Yellow=#c70#»#c56#×#c70#« %COLNAME% #c70#»#c56#×#c70#« #c52#%COLTEXT%
FormatMsg=Orange=#c71#»#c57#×#c71#« %COLNAME% #c71#»#c57#×#c71#« #c52#%COLTEXT%
FormatMsg=Red=#c72#»#c58#×#c72#« %COLNAME% #c72#»#c58#×#c72#« #c52#%COLTEXT%
FormatMsg=Pink=#c74#»#c60#×#c74#« %COLNAME% #c74#»#c60#×#c74#« #c52#%COLTEXT%
FormatMsg=Violet=#c75#»#c61#×#c75#« %COLNAME% #c75#»#c61#×#c75#« #c52#%COLTEXT%
FormatMsg=Ocean=#c65#»#c51#×#c65#« %COLNAME% #c65#»#c51#×#c65#« #c52#%COLTEXT%
FormatMsg=White=#c9#»#c1#×#c9#« %COLNAME% #c9#»#c1#×#c9#« #c52#%COLTEXT%
FormatMsg=Bot=#c52#%COLTEXT%

//---> Usage of DefaultAccess: <---
// DefaultAccess=[Access]=[FormatMsg]

//Users
DefaultAccess=User=Blue

//####################### Don't forget to replace the default #
//## !!! IMPORTANT !!! ## logins by something else because #
//####################### I'm not responsible of the results #

//---> Usage of Password: <---
// Password=[The user password]=[Access]=[FormatMsg]=
//The is optionnal

//Boss Login
Password=BossLogin=Boss=Red=#c51#Here is the boss!!!

//Bot Login
Password=BotLogin=Host=Bot=#c51#100101110011000

//Admin Login
Password=AdminLogin=Admin=Yellow=#c51#Yeah!!!! An admin!!!

//Moderator Login
Password=ModeratorLogin=Moderator=Green=#c51#Someone is checking you!!!

the replace addon containing Block & Replace

Quote :

//If an user contain the word shit in the username, ZCS will block that user
BlockName=Shit

//All sentenses containing the word "sexxx" will be blocked
BlockWord=sexxx

//If ZCS detect "Shit" everywhere in the sentense, shit will be replaced by "Shizzle"
ReplaceAll=Shit=shizzle

//If ZCS detect the word "poop", that word will be replaced by "brown object"
Replaceword=poop=brown object

the other texts info like fancy entry etc

Quote :

//You can change the winmx default entry messages by those
FancyEntryMsg=#c51#%RAWNAME% #c9#has entered
FancyEntryMsgIP=#c1#________________________________________#\n##c51#%RAWNAME% #c9#(#c51#%LINE% %FILES% files#c9#)#\n##c9#IP: #c51#%IP% #c9#/ #c51#%HOSTNAME%#\n##c9#Node: #c51#%PRIMIP%#c9#:#c51#%PRIMUDPPORT%#\n##c9#Connection: #c51#%CONNECTION%#\n##c9#Client: #c51#%CLIENTNAME% [%CLIENTVERSION%]#\n##c1#¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯

//When ZCS receives the infos about the client, it will show this to allowed users ("E" access is required to see this message)
ClientMSG=#c9#[Client] #c51#%RAWNAME% #c9#is using #c51#%CLIENTNAME% #c9#[#c51#%CLIENTVERSION%#c9#]

//Rename message when someone change his name ("e" access is required to see this message)
RenameMSG=#c9#[Rename] #c51#%OLDRAWNAME% #c9#renamed to: #c51#%NEWRAWNAME%

//Exit message when someone left the room ("X" access is required to see this message)
ExitMSG=#c9#[Exit] #c51#%RAWNAME% #c9#[#c51#%IP%#c9#]#\n##c9#Stay time: #c51#%STAYTIME%

//ZCS will tell you if other users are using the same IP ("i" access is required to see this message)
SameIPMSG=#c9#[SameIP] #c51#%IP% #c9#is also used by #c51#%RAWNAME%

//You can modify the opmsg, admsg and action message
FormatOpMsg=#c9#[OpMsg]#c8#<%NAME%> #c1#%RAWTEXT%
FormatAdMsg=#c9#[AdMsg]#c8#<%NAME%> #c9#%RAWTEXT%
FormatAction=#c3#%NAME% %TEXT%

Here is a list of commands you can use:

/Login - To login in the room
/Logout - To get default access
/ZCS - To see the version of ZCS
/ChannelName - To see the channelname
/ForceLogin - To login someone else
/Message - To send a private message to someone
/Notice - To send a notice to the room
/Say - To speak with the name of someone else
/SayAll - All users will say the message
/PrivNotice - To send a private notice to someone
/Hide - /Hide - To hide yourself or someone else
/HideCmd - To hide a command
/Mute - /Unvoice - To mute someone
/Voice - /Unmute - To voice someone
/Bot - To enable or disable bot mode
/Colour - To see the available colors
/SetColour - To set yourself a text color
/SetFormat - To set a format to someone
/Access - /Level - To see your current access
/SetAccess - To set an access to someone
/AddAccess - To add an access to someone (Only one character is allowed)
/RemAccess - To remove an access to someone (Only one character is allowed)
/Motd - To see the Motd
/Topic - To see the topic
/SetTopic - To set a topic
/Limit - To set a limit of users on ZCS
/Ban - To ban someone
/BanIP - To ban an IP
/ClearBans - To clear the list of banned users
/UnBan - To unban someone or an IP
/ListBans - To see all banned users
/KickBan - To kick and ban someone
/Kick - To Kick someone
/KickIP - To kick all users using the IP
/Stats - To see channel stats
/Stats - To see user stats
/Peers - To see all peers connected by ZCS
/Who - To see the list of users with infos
/Accesses - /Levels - To see all access letters
/Help - To see this list
/Exile - To send an user to another room
/Redirect - To redirect all users to another channel
/Reload - To reload the configuration
/Online - To show the room from the WPN
/Offline - To hide the room from the WPN
/Opmsg (/ ) - Operator message requires O access level
/Admsg (//) - Admin message requires A access level
/me or /Action - action/emote message
#\n# or #NEWLINE# - Newline